Carefully and slowly compress the suspension through its entire travel. Check that no part of your shock contacts any portion of your frame or linkage as it cycles through its travel. Pressurize your main air chamber to between 50-300psi to prepare to set sag as described in the "Setting Shock Air Pressure" section below.
Make sure that your shock is ready to ride. Clean the outside of your shock with mild soap and water and wipe dry with a soft rag. Do not use any solvents or de-greasers as these products can damage the shock's exterior finish. Do not use a high pressure washer or spray water directly at the seal/shock body junction. Inspect the exterior of your shock. The shock should not be used if any of the exterior parts appear to be damaged. Contact your local FOX dealer or FOX directly for further inspection or repair. Make sure that your quick-release levers (or thru-axles) are properly adjusted and tightened. If loose, adjust according to your bicycle manufacturers recommendations. Check that all brake cables or hoses are properly fastened. Test the proper operation of your front and rear brakes on level ground. FLOAT CTD and FLOAT X CTD shocks have a maximum pressure of 300psi. Over 99% of positive feedbacks. Sometimes, our item price is low because of stock clearance. No fake product from Cyclingvelo! If you need a special invoice for declaration, please let us know. If your item hasn't arrived yet.Sometimes, you parcel is delivered to family member but they forget to tell you. If the item doesn't match the listing description, just let us know. We are happy to resolve problem with customers. Please understand that public holidays in.
Is different from other countries. If you found that we are not response promptly, please check out whether we are enjoying holidays.